Cyclone Separator
Centrifugal Cyclone Separators That Pull Husk & Dust Out of Your Mill's Air

Cyclone Separator for Dry, Filter-Free Dust Collection
A cyclone separator (or cyclone dust collector) is a mechanical air-cleaning device used in rice mill aspiration and pneumatic conveying systems. It spins dust-laden air in a tangential inlet so heavier husk, bran dust and chaff particles are thrown outward and slide down the conical body into a discharge outlet, while cleaned air exits through a central vortex — no filter media, no moving parts inside.
Agromach's cyclone separators are sized and proportioned — body length, cone taper, inlet-to-outlet ratio — for the airflow and dust load typical of paddy processing lines, fabricated for a tight tangential inlet that sustains the dual-vortex pattern efficiency depends on.
- Separates husk, dust, and chaff via centrifugal force
- Dry separation — no filter media to clog or replace
- Efficiency driven by cyclone geometry matched to particle size
- Works as first-stage separation ahead of finer filtration
Why Poor Husk & Dust Separation Hurts a Rice Mill
When aspiration and conveying air isn't properly cleaned before discharge or recirculation, mills run into a cluster of problems:
- Rice dust and husk fines vented untreated pollute the mill site
- Fine dust settling in ducts and blower housings causes blockages
- Dust carried out with exhaust air represents lost husk/bran by-product
- Airborne rice dust is a known respiratory irritant for workers
- Fine organic husk dust is combustible, raising fire/explosion risk
Left unaddressed, dust and husk carryover becomes a pollution, safety, and product-loss problem all at once.
Centrifugal Cyclone Separation, Built for Mill Duty
A properly sized cyclone separator intercepts husk and dust at the source — inside the aspiration or conveying line — using only airflow and geometry to do the separating, with no filter media consuming power or needing replacement.
A cyclone doesn't filter dust out of the air — it spins the air until the dust can't keep up.
- Reduces husk and dust discharge into the environment
- Keeps downstream ducting and blowers from clogging
- Recovers husk and bran dust as usable by-product
- Lowers airborne dust levels on the mill floor
- Cuts combustible-dust accumulation in ducting
A durable, low-maintenance way to handle the bulk of husk and dust load, ahead of finer filtration where needed.
Agromach Cyclone Separator — Efficient & Low-Maintenance
Key design and build factors that determine how well a cyclone performs in continuous mill service.
Key Features
- High separation efficiency for coarse-to-medium particles
- Tangential inlet and conical body sustaining dual-vortex airflow
- Balanced pressure drop for good separation without excess blower load
- Sturdy mild steel or stainless steel fabrication
- Dry, no-filter-media operation
- Bottom discharge outlet for continuous or batch removal
First-Stage of Multi-Stage Dust Control
Agromach positions cyclones as the first stage in a layered system:
- Cyclone captures coarse-to-medium husk and dust
- Bag/cartridge filter (where fitted) captures finer residual dust
- Combined system reduces load on downstream filtration
- Sized to the mill's actual airflow (CFM) and duct layout
This layered approach balances cost and separation performance.
Types Available
- Cyclone Separator
- Cyclone Dust Collector
- Husk Cyclone
- Multi-Cyclone Separator
- Dust Cyclone / Air Cyclone Separator
Applications
- Aspiration systems on cleaning, dehusking, whitening lines
- Pneumatic conveying lines carrying paddy, rice, bran, or husk
- Husk and bran dust collection ahead of boilers or storage
- Pre-cleaning stage ahead of bag/cartridge filters
Cyclone Separator Price
The cyclone separator price depends on:
- Cyclone body size and airflow (CFM) capacity
- Material of construction and sheet thickness
- Single-unit vs. multi-cyclone (battery) configuration
- Fabrication precision affecting efficiency and pressure drop
- Ducting, structure, and installation scope included
Contact our team for the latest cyclone separator price sized to your mill's airflow.
Frequently Asked Questions
Need a Reliable Cyclone Separator for Your Rice Mill?
Talk to our experts to size the right cyclone dust collector for your mill's airflow and dust load.
Agromach supplies cyclone separators, cyclone dust collectors, husk cyclones, and multi-cyclone separators engineered for reliable husk and dust separation in rice mills.
Your inquiry has been submitted successfully.
Our team will contact you shortly.
Call Now: +91-9205470333